Installation instructions
20
English
NQ9300M_MOD_DOC30M977D_DE68-04479A-03_EN.indd 20
4.
Lower the oven door to the fully
open position. If the oven door does
not open to a full 90°, repeat steps 1
through 3.
5.
Locate the oven door hinge locks in
the corners of the oven door, and
rotate the hinge locks toward the oven
cavity to the locked position.
See Step 1 (illustration A) in the
"Remove Oven Door" section for
proper locked position.
6.
Close the oven door.
7.
When the hinges are properly installed
and the door closed, there should be
an even gap between upper and lower
door. If the door is uneven, remove
and reinstall door, follow steps to
"Remove Oven Door".
8.
Reconnect LED wire harness located at
the bottom right of the door.
2019-09-20 PM 3:46:38