Publicidad
Idiomas disponibles
Idiomas disponibles
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and
safer.
SYMBOLS DESIGNATION
V
Volts
A
Amperes
Hz
Hertz
W
Watts
no
No Load Speed
Alternating Current
/min
Per Minute
Class II Construction Double-insulated construction.
Safety Alert
Read The Operator's
Manual
Eye Protection
Wet Conditions Alert
Risk of Injection
Kickback
Electric Shock
Chemical Burns
Risk of Explosion
All manuals and user guides at all-guides.com
EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Rational speed, at no load
Type of current
Revolutions, strokes, surface speed, orbits, etc., per
minute
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and
understand operator's manual before using this product.
Always wear eye protection with side shields marked to
comply with ANSI Z87.1.
Do not expose to rain or use in damp locations.
To reduce the risk of injection or injury, never direct a
water system toward people or pets or place any body
part in the stream. Leaking hoses and fittings are also
capable of causing injection injury. Do not hold hoses or
fittings.
To reduce the risk of injury from kickback, hold the spray
wand securely with both hands when the machine is on.
Failure to use in dry conditions and to observe safe
practices can result in electric shock.
To reduce the risk of injury or damage, DO NOT
USE ACIDS, ALKALINES, BLEACHES, SOLVENTS,
FLAMMABLE MATERIAL, OR INDUSTRIAL GRADE
SOLUTIONS in this product.
Do not spray flammable liquids. Flammable liquids, fuel,
and their vapors are explosive and can cause severe burns
or death.
6
6
Publicidad
