Kärcher HD 4/9 Cage Manual Del Usuario página 21

Interrupting operation
1. Release the lever of the trigger gun, the
device will switch off.
2. Release again the lever of the trigger
gun, the device will switch on again.
Finishing operation
1. Set the power switch to "0".
2. Pull the power plug out of the socket.
3. Close off the water inlet.
4. Open the high-pressure gun until the de-
vice is completely depressurised.
5. Press the safety lever of the trigger gun
to secure the lever of the pistol against
being released accidentally.
Transport
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during
transport and storage.
ATTENTION
Improper transportation
Risk of damage
Protect the trigger of the high-pressure gun
from damage.
 Transporting the device in a vehicle: Se-
cure the device in accordance with the
respectively applicable guidelines to
prevent it from slipping or overturning.
 Carrying the device: Carry the device by
the handles only.
Crane transport
DANGER
Improper crane transport
Risk of injury from a falling device or falling
objects
Observe the local regulations for accident
prevention and the safety instructions.
The device may only be transported with a
crane by persons instructed in the opera-
tion of the crane.
Check the lifting gear for damage before
each crane transport.
Check the handle for damage before each
crane transport.
Lift the device only by the handle.
Do not use an slinging chains.
Secure the lifting gear against unintentional
unhooking of the load.
Remove the spray lance with high-pressure
gun, nozzles, surface cleaner and other
loose objects before transporting by crane.
Do not transport any objects on the device
during the lifting operation.
Do not stand under the suspended load.
Ensure that no persons are in the hazard
zones of the crane.
Do not leave the device handing unattend-
ed on the crane.
1. Attach the lifting gear to the handle on
the device.
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during
transport and storage.
Store the device indoors only.
Storing the device
1. Fit the spray lance with high-pressure
gun into the nozzle holder and latch into
position in the spray lance holder.
English
Storage
21