Sharp AY-X08CR Manual De Instrucciones página 13

FULL POWER OPERATION
In this operation, the air conditioner works at maximum power to makes the room
cool (or warm with models AY-X08CR/AY-X10CR/AY-X13CR) so rapidly that you can
use it just after you come home.
PM
FULL
DISPLAY
POWER
ONE-HOUR OFF TIMER
When the ONE-HOUR OFF TIMER is set, the unit will stop operating after one hour.
| {
{ |
MODE FAN
1h
SWING
(The heat mode symbol
models AY-X08CR/AY-X10CR/AY-X13CR)
NOTES:
• The ONE-HOUR OFF TIMER operation has priority over TIMER ON and TIMER OFF
| {
operations.
{ |
• When the ONE-HOUR OFF TIMER is set while the unit is not operating, the unit will
operate for an hour with the formerly set condition.
• If you wish to operate the unit for another hour before the ONE-HOUR OFF TIMER
activiates, press the ONE-HOUR OFF TIMER button again during operation.
| {
• If TIMER ON and/or TIMER OFF are set, TIMER CANCEL button cancels every setting.
{ |
1
To activate the FULL POWER operation, press
the FULL POWER button during operation.
• The remote control will display
• the temperature display will go off.
TO CANCEL
Press the FULL POWER button again.
• FULL POWER operation will also be cancelled when
the operation mode is changed, or when the unit is
turned off.
1
NOTES:
• You cannot use the FULL POWER operation during the
FAN ONLY mode.
• You cannot set the temperature during the FULL POWER
operation.
1
Press the ONE-HOUR OFF TIMER button.
• The remote control displays "1 h".
• The orange TIMER lamp (
• The unit will stop operating after one hour.
TO CANCEL
Press the TIMER CANCEL (SET/C) button.
• The orange TIMER lamp (
Or, turn the unit off by pressing the ON/OFF button.
• The red OPERATION lamp (
lamp (
1
is provided only on
E-11
) on the unit will light up.
) on the unit will turn off.
) and the orange TIMER
) on the unit will turn off.
.