JVC AA-V50EG Manual De Instrucciones página 5

SUPPLY POWER TO CHARGER
1
Make sure you unplug the camcorder's
DC cord from the AC Power Adapter/
Charger.
Plug the AC Adapter/Charger's power
cord into an AC outlet. The power lamp
comes on.
ATTACH BATTERY/BATTERIES
2
Attach the battery pack while making sure
its terminal side
indicator side of the battery pack mount
on the AC Power Adapter/Charger.
• The Charger Indicator (1 or 2) begins
blinking to indicate charging has started.
CONFIRM STATUS
3
When the charger indicator stops blinking
but stays lit, charging is finished.
• If two batteries are attached to the
charger, they will be charged in the
order that they were attached.
Downloaded from:
1
is in contact with the
https://www.usersmanualguide.com/
DETACH BATTERY/BATTERIES
4
Slide the battery or batteries in the
opposite direction of the arrow and lift
off. Remember to unplug the AC Adapter/
Charger's power cord from an AC outlet.
NOTE:
Perform charging where the temperature is
between 10° and 35°C. (20°–25°C is the ideal
temperature range for charging.) If the
environment is too cold, charging may be
incomplete.
BATTERY PACK CHARGING TIME
Battery pack ONE
approx. 1 hr.
BN-V507U
30 min.*
BN-V514U approx. 3 hrs.*
* When charged at temperatures between 20°
and 25°C.
•When charging Battery Packs after a long
storage period, charging time will be longer
than the time indicated above.
TWO
approx. 3 hrs.*
approx. 6 hrs.*
EN-5