Publicidad
Idiomas disponibles
Idiomas disponibles
Transport
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transport and storage.
1. When transporting in vehicles, se-
cure the device against slipping and
tipping over according to the appli-
cable guidelines.
Storage
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transport and storage.
1. Store the device indoors only.
Care and service
1. Rinse the device and accessories at
regular intervals with a suitable liq-
uid and allow them to dry.
2. Regularly check the star filter for
damage. Replace the star filter if
damaged.
Washing the star filter
The star filter can be washed out under
running water.
Always flush the star filter from inside
to outside to prevent any remaining
particles from affecting filter perfor-
mance.
ATTENTION
Risk of damage
Do not use detergents or bleach.
Replacing the star filter
For the figures, please refer to the
graphics page
Illustration D
Sealing ring
1
Filter vibrator
2
Spacer
3
Filter ring
4
Star filter
5
1. Switch off the device and disconnect
it from the mains supply.
2. Unlock and remove the suction
head.
3. Unlock the remove the spacer.
4. Remove the star filter.
5. Check the sealing ring for damage.
6. Insert the new star filter:
a Pull the star filter over the filter vi-
brator on the spacer so that the vi-
brator elements are aligned in the
middle of the filter pockets.
b Place the spacer with the star filter
and filter vibrator on the filter ring.
c Lock the spacer.
7. Fit the suction head and lock.
Replacing the flat fold filter
For the figures, please refer to the
graphics page
Illustration E
1. Open the filter cover.
2. Replace the flat fold filter.
3. Close the filter cover.
The filter cover must audibly click in-
to place.
English
11
Publicidad
