Futurelight CY-100 Manual Del Usuario página 24

Pan Reverse
With this function you can reverse the mirrored cylinder movement.
Display close time
With this function you can shut off the LED display.
Remote Control socket
If you wish to lock the light output - via an optional FUTURELIGHT Easy-4 remote control, connect your
Easy-4 remote control to the remote control socket.
The remote control Easy-4 can be used for switching the gobos and the Auto/Manual mode. In Auto Mode,
the gobos are switched sound-controlled. In Manual Mode, the gobos are switched via remote control.
DMX-512 connection / connection between fixtures
The wires must not come into contact with each other, otherwise
Please note, the starting address depends upon which controller is being used.
Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the controller with
the fixture or one fixture with another.
the fixtures will not work at all, or will not work properly.
24/56 51837510_V_1_0.DOC