Holmatro ICU 05 Serie Manual página 29

2.7 Safety regulations with respect to maintenance
• Wear personal means of protection when performing maintenance tasks.
• Never work in a way that could jeopardize safety.
• Make sure that the equipment cannot roll away or tip over. The control and drive must be switched
off and safeguarded against unexpected activation.
• Make sure that moving parts do not move unexpectedly.
• Used or leaked fluids, and any other products consumed during the activities, must be collected and
disposed of in a environmentally responsible way.
3 Description
3.1 Equipment
The cutter is produced as a hand tool that can be operated by one person. Two hoses connect the tool
to a pump. On the front of the tool there are two blades that make a scissor movement. The high
hydraulic pressure that is used means these tools can apply enormous forces.
3.1.1 Type designation
Example: ICU 05 A 10
/i
Digit Example Description
1-3 ICU I = Industrial
CU = Cutter
4-5 05 Type indication
6 A A = aluminum body
7-8 10 Blade choice, see Fig. 2B
3.2 Product identification
Refer to Fig. 2A and 2B.
/i
1 Quick-lock couplers
2 Return line safety valve
3 Deadman's handle
4 Carrying handle
5 Cutter bolt
3.3 Weight and dimensions
Refer to Fig. 3.
/i
Model Part number
ICU 05 A 10 170.012.099
ICU 05 A 30 170.012.100
ICU 05 A 60 170.012.101
ICU 05 A 70 170.012.102
ICU 10 A 10 170.012.053
ICU 10 A 20 170.012.054
ICU05/10
6 Cutting recess
7 Cutting edge
8 Guard
9 Grease duct
10 Cutter guide
Length (A)
Weight (kg)
(mm)
10.3 630
9.4 580
10.4 655
9.5 602
17.3 738
15.3 674
916.000.905_002
Width (B) Height (C)
(mm) (mm)
210 170
230 177
EN
29