OHAUS Frontier FC5515R Guia Del Usuario página 8

Check that the fixing screw is properly installed before each run.
Do not operate the centrifuge with rotors or buckets which show any signs of
corrosion or mechanical damage.
Do not operate with extremely corrosive substances, which could damage
the rotor, buckets and materials.
In case of any questions, please contact the manufacturer!
2.4 Installation of rotors
5706
5707
a. Clean the drive shaft as well as the collet with a clean,
grease-free piece of cloth.
b. Place the rotor onto the drive shaft. Make sure that the rotor
is fully installed onto the motor shaft.
c. Place the rotor onto the drive shaft. Make sure that the rotor
is fully installed onto the motor shaft.
a. Clean the drive shaft as well as the collet with a clean,
grease-free piece of cloth.
b. Place the rotor onto the drive shaft. Hold the rotor with one
hand and secure the rotor to the shaft by turning the fixing
screw clockwise
6