Publicidad
Idiomas disponibles
Idiomas disponibles
Locknut
Sleeve
Locknut
3. Install the Lavatory Spout
NOTE: The flexible hoses do not need to be removed.
From the underside of the lavatory, loosen and remove the
locknut, friction washer and the rubber washer.
Unthread and remove the brass tee and fiber washer from the
spout shank.
Loosen and remove the locknut and plastic washers.
Lift the spout out of the lavatory and slip off the rubber gasket,
escutcheon and sleeve.
Install the new sleeve.
Reassemble the spout to the lavatory.
Kohler Co.
Fiber Washer
Brass Tee
Rubber Washer
Friction Washer
Collar
Escutcheon
Rubber Gasket
Plastic Washers
5
106331-2-BB
Publicidad
