Implementation - Functional Characteristics; Reference Conditions - Chauvin Arnoux F 09 Manual De Instrucciones

MAX
MIN
OK
PF
AC
DC
: Semi-conductor test on position Ω Ω Ω Ω Ω
3∅ ∅ ∅ ∅ ∅
The Buzzer
Different tones are emitted according to the function given
to the buzzer :
- Short and medium sound: valid key
- Short and high-pitched sound: prohibited key
- Short and low sound: Quit MIN/MAX mode
- 2 short and high-pitched beeps: validation of a
configuration parameter
- Short and medium sound every 400 ms: voltage
measured higher than the unit's guaranteed safety
voltage.
- 5 short and medium recurring beeps: automatic
deactivation of the instrument
- Short and medium sound:
measured continuity value, lower than programmed
threshold, short-circuit junction during semi-conductor
test.
- Modulated medium continuous sound: value
measured in volts, higher than 45 V peak when the V-
Live function is selected.
FUNCTIONAL CHARACTERISTICS

3.1 Reference conditions

The functional characteristics mentioned in each of the
measurement functions are guaranteed in the following
reference ranges:
- Temperature: +23°C ± 3 K
- Humidity: 45% to 75% relative humidity
- Supply voltage: 8.5 V ± 0.5 V
- Frequency range of applied AC signal: 45 -65 Hz
Indicates the display of a maximum value in
MIN/MAX mode
Indicates the display of a minimum value in
MIN/MAX mode
Symbol which goes on during the phase rotation
direction detection sequence.
Goes on steady, for switch position W, if power
factor display is selected (yellow key)
Fixed: measurement in AC manual mode
Flashing: measurement in AC automatic mode
Fixed: measurement in DC manual mode
Flashing: measurement in DC automatic mode
Power measurement on balanced 3 phases
system.
3. IMPLEMENTATION
30