Hiti P52L Manual De Usuario página 6

: Do not place the printer under a humid or dusty place. It can cause a fire,
electric shock or printer problem. Do not place the printer with dust, sand and high humidity
such as bathing place, bathroom, hot spring or the street.
: Do not place the printer on rickety place and/or inclined place. Printer may fall
down or tumble and it can cause serious injury.
＊ Attention: Keep the printer out of direct sunlight
＊ Do not put metallic objects or case/cup with any liquid on top of the printer. Water spilt
on metallic items fall into the printer may cause the fire and electric shock. In case the
water spilt or metallic items fall into the printer, please turn off the printer power
immediately.
: Do not block the openings of the printer. In case, the opening blocked, the heat
will remain inside and it can cause the fire.
: Do not insert or fall the metallic or flammable items into the printer through
the openings of the printer, it can cause the fire or electric shock.
◎ Handling Instruction
When handling the printer, please pay attention to the followings:
: Lift the printer from its box and put it onto a flat and firm table or desk.
: The printer alone (without paper and ribbon installed) is weighted around
18Kgs. Please handle the printer carefully to prevent personal injury and damage of the
printer.
6