SOMFY TILT ONLY 50 WF ZIGBEE Instrucciones página 13

TILT ONLY 50 WF ZIGBEE
Stop function
▪ Briefly press the my button on the control point to stop the tilting of the slats.
Favourite position (my)
NOTICE
An intermediate stop, which is called the "favourite position (my)", is different from the upper and lower positions.
Programming or modifying the favourite position (my)
NOTICE
Only one favourite position (my) is permitted.
1] Move the slats to the desired favourite position using the Up or Down
button.
2] Briefly press the my button to stop the slats.
3] Press and hold the my button until the slats briefly move up and down:
g The desired favourite position (my) is programmed and green LED blinks
5 times.
Using the favourite position (my)
▪ If a favourite position (my) is programmed, briefly press the my button on the
control point twice in succession: the slats first move to the lower end limit
and then to the favourite position (my).
3.2.Use with TaHoma ready solution
3.2.1.Up and Down buttons
▪ Briefly press the Up or Down button on the control point to tilt the slats to
the up or lower position of tilting.
▪ Press and hold the Up or Down button on the control point until the slats
reach the desired position of tilting. The movement stops when the button is
released.
Stop function
▪ Briefly press the my button on the control point to stop the tilting of the slats.
Favourite position (my)
NOTICE
An intermediate stop, which is called the "favourite position (my)", is different from the upper and lower positions.
©
Copyright 2023 SOMFY ACTIVITES SA. All rights reserved.
1]
2] 3]
x 2 =
EN
13