SEVERIN VKS 8842 Instrucciones De Uso página 23

Changing the door hinge
1. Unscrew the two screws that fix the device
cover from behind. Remove the device
cover and put it away.
2. Remove the screws from the top of the
appliance and remove the top door hinge.
3. Raise the door a bit and detach it from the
lower hinge. Place the door in a safe area.
4. Tilt the device slightly backwards and
unscrew the adjustable front feet of the
appliance.
5. Unscrew the screws that hold the bottom
door hinge in place and remove the door
hinge.
Screw down the door hinge and the feet
back on the other side.
6. Place the door on the pivot bolt of the bot-
tom door hinge and press it lightly against
the device.
Insert the top door hinge with the pivot bolt
in the socket on the top of the door and
secure it with the two screws. Screw the
other two screws back in on the other side.
7. Replace the device cover and screw it tight
with the two screws.
Details for After-Sales Service
If a repair is necessary, please contact the
service hotline directly with an explanation of
the defect. Before you do that, write down the
article number from the rating label on the
appliance (see figure), since this is needed for
the smooth processing of your request.
- 23 -