Integra Codman ISOCOOL Manual De Instrucciones página 6

For use with the CMC-V generator:
REF 80-9104 or REF 80-1188
For use with the CMC-III generator:
REF 80-1186 or REF 80-1188
Product Description
The ISOCOOL Bipolar Forceps consist of:
• an insulated, reusable ISOCOOL Bipolar
Forceps Handle
• a pair of sterile, nonsticking ISOCOOL
Bipolar Forceps Tips
The unique AHT
Technology employed in the forceps tips is
designed to eliminate sticking of tissue. In
addition, the tip design helps ensure properly
aligned forceps each time. These features of
the ISOCOOL Bipolar Forceps can help save
procedure time by minimizing or eliminating
the need to clean or replace the forceps.
The ISOCOOL Bipolar Forceps are designed
for use with bipolar electrosurgical generators,
such as the CMC-V generator, or the CMC-III
generator, for cauterizing, coagulating,
grasping, and manipulating tissue.
The tips are available in a variety of lengths
and diameters. Any pair of ISOCOOL Tips can
be used with any ISOCOOL Bipolar Forceps
Handle. Use only an ISOCOOL handle with
the ISOCOOL tips. Please consult your local
Integra representative for ordering information.
How supplied
This product is intended for SINGLE USE
ONLY; DO NOT RESTERILIZE. Integra
Single Use devices have not been designed
to undergo or withstand any form of
alteration, such as disassembly, cleaning
or re-sterilization, after a single patient use.
These devices are intended to come into
contact with the central nervous system and
the ability does not currently exist to destroy
possible contaminates such as Creutzfeldt-
Jakob Disease. Reuse can also compromise
device performance and any usage beyond
the design intent of this single-use device can
(Active Heat Transfer)
®
4