Sauder Manhattan Gate Serie Instrucciones De Montaje página 12

Step 6
å
Fasten one EXTENSION RAIL (5) to the LEFT END (C). Use three 3/8" PAN HEAD SCREWS (21) through the exact
holes shown.
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in the enlarged diagram. Then, slide the inner
cartridge of the EXTENSION RAIL in to find the other holes that line up with the holes in the UPRIGHT. Turn a SCREW
into each hole.
å
Fasten one of the CABINET LEFT RAILS (2) to the LEFT END (C). Use three 1/2" FLAT HEAD SCREWS (22).
1/2" FLAT HEAD SCREW
(3 used for the CABINET RAIL)
Roller end
Open end
Page 12
2
R R
22
2
www.sauder.com/service
(3 used for the EXTENSION RAILS)
5
5
C
7
21
3/8" PAN HEAD SCREW
429254