Sauder Manhattan Gate Serie Instrucciones De Montaje página 11

Step 5
å
Fasten one EXTENSION RAIL (5) to the RIGHT END (B). Use three 3/8" PAN HEAD SCREWS (21) through the exact
holes shown.
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in the enlarged diagram. Then, slide the inner
cartridge of the EXTENSION RAIL in to find the other holes that line up with the holes in the UPRIGHT. Turn a SCREW
into each hole.
å
Fasten one of the CABINET RIGHT RAILS (1) to the RIGHT END (B). Use three 1/2" FLAT HEAD SCREWS (22).
1/2" FLAT HEAD SCREW
(3 used for the CABINET RAIL)
429254
1
R R
22
www.sauder.com/service
3/8" PAN HEAD SCREW
(3 used for the EXTENSION RAILS)
5
Roller end
1
5
B
7
21
Open end
Page 11