Sauder Manhattan Gate Serie Instrucciones De Montaje página 9

Step 3
å
Fasten one EXTENSION RAIL (5) to the LEFT UPRIGHT (F). Use three 3/8" PAN HEAD SCREWS (21) through the
exact holes shown.
å
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in the enlarged diagram. Then, slide the inner
cartridge of the EXTENSION RAIL in to find the other holes that line up with the holes in the UPRIGHT. Turn a SCREW
into each hole.
å
Fasten one of the CABINET RIGHT RAILS (1) to the LEFT UPRIGHT (F). Use three 1/2" FLAT HEAD SCREWS (22).
1/2" FLAT HEAD SCREW
(3 used for the CABINET RAIL)
Open end
429254
1
R R
22
5
Roller end
www.sauder.com/service
3/8" PAN HEAD SCREW
(3 used for the EXTENSION RAILS)
5
Roller end
F
1
7
21
Page 9