Sauder Manhattan Gate Serie Instrucciones De Montaje página 24

Step 18
å
Fasten one LARGE DRAWER BACK (Q) to the LOCKING
DRAWER SIDE (N) and LARGE LEFT DRAWER SIDE (P). Use
four 1-1/2" FLAT HEAD SCREWS (18).
å
NOTE: You should start each SCREW a few turns before
completely tightening any of them.
å
Fasten one DRAWER PULL (S) to the LARGE LEFT DRAWER
FRONT (M). Use two 1/2" FLAT HEAD SCREWS (22).
1-1/2" FLAT HEAD SCREW
(4 used for the DRAWER BACK)
Q
P
Page 24
18
N
www.sauder.com/service
Be sure the
DRAWER
BOTTOM inserts
into the DRAWER
BACK groove.
1/2" FLAT HEAD SCREW
(2 used for the DRAWER PULL)
22
M
S
429254