Publicidad
Idiomas disponibles
Idiomas disponibles
GB
MT
Sound pressure level
(L
) ............. 68,5 dB (A); K
pA
Sound power level (L
measured .......74.1 dB(A); K
Vibration (a
) ...... 3.05 m/s
n
* The grinding disc must withstand a rotational
speed of at least 40 m/s.
** A break is introduced after 15 minutes of
uninterrupted operating duration until the de-
vice temperature differs 2 K (2 °C) less than
room temperature.
The specifi ed noise emission value has
been measured according to a standard-
ised testing method and may be used for
comparison with another power tool.
The specifi ed noise emission value may
also be used for an introductory assess-
ment of the exposure.
Warning: The noise emission val-
ue whilst actually using the power
tool may vary from the given values
regardless of the type and way in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. All parts of the op-
erating cycle have to be considered
while doing so (for example, times
when the power tool is switched off
and times when it is switched on
but running without any load).
Grinding disc PA 104 WA 100
(from scope of delivery):
............. max. 7350 min
Idling speed n
0
Rotational speed ............... max. 40 m/s*
Outer diameter ...................... Ø 104 mm
Bore hole ................................ Ø 22 mm
Thickness ................................... 3.2 mm
22
= 3 dB (A)
pA
)
wA
= 3 dB(A)
wA
2
; K= 1.5 m/s
For all standard saw chains with
link size 1/4". Also suitable for
0.325" and 3/8" links that can
be processed with 3.2mm thick
grinding wheels (please note of the
2
information provided by the chain
manufacturer).
Information on reordering grinding discs
can be found under "Spare parts/acces-
sories".
Safety information
CAUTION!
The following basic safety precau-
tions must be observed while using
power tools to protect against elec-
tric shock, injury and risk of fi re.
Please read all instructions before
using this power tool and keep the
safety instructions in a safe place.
Symbols on the device
Caution!
Injury hazard caused by rotating
tool! Keep hands away.
Danger of electric shock!
Remove the plug from the mains
socket before carrying out mainte-
nance and repair work.
Do not expose device to rain.
Please read and comply with the
operating instructions for the device!
-1
Risk of injury!
Wear eye and hearing protection!
Publicidad
