Publicidad
Idiomas disponibles
Idiomas disponibles
Step5
STEP 5
58
67
6
Step6
STEP 6
14
13
30
7
17
30
17
ASSEMBLY STEPS
72
70
67
9
67
58
3
8
7
67
70
62
68
8
62
68
68
65
30
30
STEP 5:
Attach the Upper Cross Beam (9) to the Weight
Guide Tubes (3) using 2 Bolts (72).
Attach the Upper Cross Beam (9) to the Support
Frame (8) using 2 Hex Bolts (58), 4 Washers (67)
and 2 Nylon Nuts (70).
Proceed to attach the Leg Extension Frame (6) and
the Seat Base Frame (7) by using 1 Hex Bolt (58), 2
Washers (67) and 1 Nylon Nut (70).
Ensure all bolts are tight before proceeding.
STEP 6:
Attach the Back Cushion (14) to the Support Frame
(8) using 2 Hex Bolts (62) and 2 Washers (68).
Now attach the Seat Cushion (13) to the Seat Base
Frame (7) using 4 Hex Bolts (65) and 4 Washers
(68).
Insert the Foam Tube (17) into the Leg Extension
Frame (6) and the Seat Base Frame (7).
Ensure all bolts are tight before proceeding.
Slide the Leg Foam Rollers (30) onto the Foam
Tubes (17).
Leg length is different, up and down adjustment
Foam Tube(17) can adjust to the appropriate
position.
35
Step7
56
66
10
69
66
12
39
39
11
61
67
51
46
23
31
18
Publicidad
