HOMCOM 823-044V70 Manual Del Usuario página 9

When the machine is plug on for the first time, the buzzer will shout, and the
machine will get into standby status.
1. Power Key: Press this key to turn on and turn off the unit.
2. Mode Key: When the unit is on, press this key to switch between COOLING →
DEHUMIDIFYING→ FAN.
3. TIMER Key: When the unit is on, press the key to close timer; When the unit is
off, press the key to open timer.
Press the key, when the timer symbol flashes, press up and down key to select the
required timer value.
Timer values can be set in 1-24 hours and the timer value is adjusted up or down by
one hour.
4. DOWN Key: Under timer mode, press this key to adjust the timer downwards.
Under cooling mode, press this key to adjust the temperature lower.
This function is not available under FAN mode and DEHUMIDIFYING mode.
5. UP Key: Under timer mode, press this key to adjust the time upwards.
Under cooling mode, press this key to adjust the temperature higher.
This function is not available under FAN mode and DEHUMIDIFYING mode.
6. FAN SPEED Key: In cooling and fan mode, press this key to select high, low
speed. This function is not available in SLEEP mode and DEHUMIDIFYING mode.
7. SWING Key: Press the swing button to change the orientation of the louvres to
direct the air.
8. Sleep Mode Key: When the power is on and in cooling mode, press 'SLEEP'
button to start the sleep mode. Under sleep mode, the FAN speed is set to LOW
speed and not adjustable. The SLEEP mode can be cancelled by pressing the
button. The function can not be turned on the sleep mode in the dehumidifying or
Fan mode.
9. ATMOSPHERE LIGHT: While the unit is running, the atmosphere light will
turned on to reflect each modes or conditions.
l Air Conditioning Mode, it will be illuminated with blue light.
l Fan Mode, it will be illuminated with white light.
l Dehumidifying Mode, it will be illuminated with green light.
When there is excess water condensation inside the unit, the air conditioner stops
running and the it will be illuminated with red light.
To turn the Atomosphere Light ON/OFF, Press "SLEEP" the for 3 seconds.
8