SOMFY Roll Up Basic 28 WFRTS Instrucciones página 20

EN
NOTICE
If the motorised product still does not work, contact a drive and home
automation professional.
3.5.2.Adding/Deleting control points
A A B A B
NOTICE
Orange LED blinks slowly when adding or deleting a remote control.
3.5.2.1.Using a control point that has been previously programmed to
the motorised product
1] Press and hold the PROG. button (A) on
the programmed control point until the
motorised product briefly moves up and
down.
ð Green LED blinks 5 times then orange
LED blinks slowly.
2] Briefly press the PROG. button (B) on the
control point to add or delete.
g Green LED blinks 5 times.
3.5.2.2.Using the Programming button on the drive head
1] Press and
programming button until the motorised
product briefly moves up and down.
ð Green LED blinks 5 times then orange
LED blinks slowly.
2] Briefly press the PROG. button (B) on the
control point to add or delete.
g Green LED blinks 5 times.
20
A B
hold the
Copyright
1]
2]
drive head
1]
2]
©
2021 SOMFY ACTIVITES SA. All rights reserved.
Roll Up Basic 28 WF RTS Li-ion
2 s
A
PROG.
0.5 s
B
PROG.
0.5 s
B
PROG.