SOMFY Roll Up Basic 28 WFRTS Instrucciones página 9

Roll Up Basic 28 WF RTS Li-ion
2.3.2.Pre-programming the control point
Press the Up and Down buttons simultaneously
on the control point:
→ The motorised product moves up and down.
The control point is pre-programmed.
2.3.3.Checking the direction of rotation
Press the Up button on the control point:
a] If the motorised product rises, the direction of
rotation is correct: move onto section Setting
the end limits.
b] If the motorised product lowers, the direction
of rotation is incorrect: move onto the next step.
b1] Press the my button on the control point until
the motorised product moves up and down: The
direction of rotation has been modified.
b2] Press the Up button on the control point to
check the direction of rotation.
2.3.4.Setting the end limits
NOTICE
The end limits can be set in any order.
1] Press and hold the Up button to move the
motorised product to the desired up
position. If necessary, adjust the up
position using the Up or Down buttons.
2] To memorize the upper end limit: Press
the my and Down buttons simultaneously
and release once the motorised product
begins to move. The upper end limit is
now memorized and green LED blinks 5
times.
©
Copyright 2021 SOMFY ACTIVITES SA. All rights reserved.
]
a
]
b
b1] b2]
1] 2]
3] 4]
5]
EN
9