Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
• If the machine behaves unusually as follows, turn off the power immediately.
After turning off the power, make sure to disconnect the power cord plug
from the wall outlet, and then contact your service representative and report
the problem. Continuously using the power cord can result in fire or electric
shock.
• The machine is emitting smoke
• The machine is emitting odors
• Metal objects or other foreign objects have fallen inside the machine
• Water or other fluids have fallen inside the machine
Requirements for Relocating Machines
CAUTION
• When moving the machine, do not hold the control panel. Doing so may
damage the control panel and can result in injury or malfunction.
• When carrying or moving the machine by lifting it for relocation to another
floor, contact your service representative. Dropping or toppling the machine
can result in injury or malfunction.
• After moving the machine, use the caster fixture to fix it in place. Otherwise,
the machine might move or topple over to cause injury.
• When moving the machine, make sure to unplug the power cord from the
wall outlet and confirm that line cords and other connecting cables have
been removed. Otherwise, the power cord is damaged, possibly resulting in
fire or electric shock.
Requirements for Using the Machine
CAUTION
• When pulling out the paper tray, do not pull it out swiftly. The tray may fall
and cause injury.
• Do not look into the light source. Doing so may damage your eyes.
CAUTION
• Do not use stapled sheets of paper, aluminum foil, carbon paper, or any
kind of conductive paper. Doing so can result in fire.
• Keep USB flash memory devices out of reach of children. If a child
accidentally swallows an USB flash memory device, consult a doctor
immediately.
• When you open the bypass tray when a banner sheet guide tray is installed,
do not put your hands on the front side and the back side of the place
indicated by the label of the banner sheet guide tray. Otherwise, your
fingers might be caught, resulting in injury.
• Keep your hands clear of the paper output slot of the finisher booklet tray
when pulling it out or pushing it in the finisher's staple unit. You may trap
your fingers in the machine's gap and injury can result.
• Do not push or pull the attention light when installed to the machine. Doing
so may result in damage or malfunction of the attention light or the machine.
Requirements for Handling the Machine's Interior
WARNING
• Do not remove any covers or screws other than those explicitly mentioned
in this manual. There are high voltage components inside the machine
that can cause electric shock. Also there are laser components inside
the machine that can cause blindness. Contact your sales or service
representative if any of the machine's internal components require
maintenance, adjustment, or repair.
• Do not disassemble or modify this machine. Doing so can result in fire and
electric shock. Also, exposure to the laser components inside this machine
risks blindness.
• Do not remove any covers or screws other than those explicitly mentioned
in this manual. There are high voltage components inside the machine
that can cause electric shock. Also there are LED components inside
the machine that can cause eye damage. Contact your sales or service
representative if any of the machine's internal components require
maintenance, adjustment, or repair.
• Do not disassemble or modify this machine. Doing so can result in fire and
electric shock. Also, exposure to the LED components inside this machine
risks eye damage.
8
Publicidad
