Candy CI642CBB Manual De Instrucciones página 26

Cautions
 The hob must be installed by qualified personnel or technicians. We have
professionals at your service. Please never conduct the operation by yourself.
 The hob shall not be mounted to cooling equipment, dishwashers and rotary dryers.
 The hob shall be installed such that better heat radiation can be ensured to enhance
its reliability.
 The wall and induced heating zone above the work surface shall withstand heat.
 To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
 A steam cleaner is not to be used.
 This ceramic can be connected only to a supply with system impedance no more
than 0.427 ohm. In case necessary, please consult your supply authority for system
impedance information.
Connecting the hob to the mains power supply
The power supply should be connected in compliance with the relevant standard, or a
single-pole circuit breaker. The method of connection is shown below.
25