4
MANUAL OPERATION
By way of the supplied key
By way of release box (optional, not supplied)
A release box can be installed if required since the
actuator has a device to install the release cable.
5
CONTENT OF THE PACKAGE
O
Actuator package:
1
Actuator
2
Wall bracket
3
Cover
4
Release key
5
Release orifice cap
Fig. 2
Content and spare parts
3
The arm components are supplied separately
6
Screws to attach the
actuator to the bracket
7
Elastic washers
8
Washers ø10
9
Screws to attach the cover
to the bracket
10 Release spring
DESCRIPTION OF THE PRODUCT
In the event of need, the gate may be operated
manually, first operating the release mechanism.
A- Release
1 Remove the cap (1) and introduce the key (2). Turn
until you hear a click.
2 Move the gate manually.
B- Locking
1 Introduce the key (2) and turn until you hear a click.
The gate remains locked.
2 Position the cap (1).
In order to install the release cable, see "Installation
of release box for manual drive" on page 22.
Arm package (AAR01 or AAR02):
11 Actuator arm
12 Articulated arm
13 Gate support
14 Joint screws
15 Self-locking nuts
16 Joint washers
17 Screw and washer to attach the arm
to the shaft
ARC electro-mechanical actuator
17