Description Of The Product; Elements Of The Complete Installation - Erreka AR24C Manual Del Instalador

DESCRIPTION OF THE PRODUCT

1

ELEMENTS OF THE COMPLETE INSTALLATION

INSTALLATION COMPONENTS:
1 Actuator
2 Flashing light
3 Gate
4 Exterior photocells
5 Key selector
6 Wall button
7 Control panel
8 Connections box
9 Electrical installation
10 Interior photocells
11 Electrolock
12 Closing stopper
13 Antenna

We recommend using the VIVO-D203 control panel for the AR24C, and the
VIVO-M201 for the AR220C.
ELECTRICAL CABLING:
Element
A: General power supply
B: Flashing light
C: Photocells (Tx / Rx)
D: Button or key selector
E: Motor/encoder
F: Antenna
Fig. 1 Elements of the complete installation

The safe and correct operation of the
installation is the responsibility of the installer.
Nº threads x section Maximum length
2
3x1.5 mm 30 m
2
2x0.5 mm 20 m
2 2
2x0.5 mm / 4x0.5mm 30 m
2
2x0.5 mm 25 m
2 2
2x1 mm / 3x0.5mm 8 m (maximum 25 m with cable 2x2.5 mm
Screened cable 5 m

For greater safety, Erreka recommends installing the
photocells (4) and (10).
ARC electro-mechanical actuator
English
2 2
/ 3x0.5 mm
15