Unpacking; Actuator Installation - Erreka AR24C Manual Del Instalador

3

UNPACKING

1 Open the packages and remove the contents from
within.
}
Discard the packaging in an environmentally
friendly manner, using recycling containers.

Do not leave the packaging within the reach
of children or handicapped people, as it may
cause injury.
4

ACTUATOR INSTALLATION

Assembly positions and levels

It is necessary to install an opening and closing stopper.
450 mm arm

Level A and the required opening angle (B) determine level C
(see attached chart).
650 mm arm

Level A and the required opening angle (B) determine level D
(see attached chart).
Fig. 3 Example of assembly position of the actuator
2 Check the content of the packages (see "Fig. 2
Content and spare parts" on page 17).

Should it be noticed that a piece is missing or
deteriorated, contact the nearest technical service.
C (cm.) A (cm)
16-20 0
20-22
22-35
16-20 5
22-25
25-35
16-20 10
23-25
28-35
16-20 15
25-30
30-35
16-20 20
26-35
-
16-20 25
-
-
- 30
-
-
- 35
-
- 40
- 50
- 60
INSTALLATION
B (º) D (cm)
90 16-20
110 20-35
120 22-35
90 16-20
110 22-35
120 25-35
90 16-20
110 23-35
120 28-35
90 16-20
110 25-35
120 30-35
90 16-20
110 27-35
120 34-40
90 16-20
110 28-35
120 36-50
90 16-20
110 30-35
120 40-45
90 16-20
110 32-35
90 16-20
90 16-20
90 16-20
ARC electro-mechanical actuator
19