UNPACKING AND CONTENT
1
UNPACKING
1 Open the package and remove the contents from
within.
}
Discard the packaging in an environmentally
friendly manner, using recycling containers.
Do not leave the packaging within the reach
of children or disabled people, as it may cause
injury.
2
CONTENT
1
Operator
2
Anchor plate (base plate)
3
Studs (four) + nuts (twelve)
4
Brackets (two)
5
Screws with washer (four)
6
Unlocking keys (two)
7
Installation Guide
8
Set of limit switches (two)
Fig. 3
Content
60
Installation Guide
2 Check the content of the package (see figure
below).
Should it be noticed that a piece is missing or
deteriorated, contact the nearest technical service.
Each set (8) contains:
a
Magnet holder plate
b
Closing limit switch magnet
c
Magnet holder plate support
d
Screws (two) with nuts (two) and
washers (four)
e
Screws with washers (two)
f
Pressure screws (two)