USE AND OPERATION
Turn off
Turn the knob (B) to MIN (the burner is still on
1)
in thermostatting function).
Turn the knob (A) to "
2)
pliance.
Close the gas tap and disable the main power
3)
supply to ensure safety conditions
If the safety thermostat trips, the appliance
needs to be reset to the initial working condi-
tions as follows.
Pull off the knobs (A).
1)
Undo the screws (C) and remove the control
2)
panel (B).
Press the button (D) of the safety thermostat
3)
to restore the gas supply of the oven burner.
After completing the operation, fi t the control
4)
panel (B) and the knobs (A) back in place.
In case of lengthy downtimes, as well as dis-
connecting all supply lines it is also essential
to clean all internal and external parts of the
appliance and the surrounding environment
thoroughly, complying with the Manufacturer's
instructions and the relevant applicable laws.
If the appliance is left inactive for a lengthy pe-
riod, proceed as follows.
Close the gas supply tap.
1)
3386390_ut_GB
" to turn off the ap-
RESETTING THE APPLIANCE
LONG PERIODS OF SHUT-DOWN
A
B
A
A
C
B
Clean the appliance and the surrounding ar-
2)
eas thoroughly.
Spread a fi lm of edible oil over the stainless
3)
steel surfaces.
Carry out all the servicing procedures.
4)
Cover the appliance and leave a few gaps to
5)
let air circulate.
ENGLISH
B
D
C
21