Descargar Imprimir esta página

Fiem COSMO Manual De Uso página 21

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

WARRANTY
Each part of the machine has been fully tested by the manufacturer before delivery or shipping. The manufacturer's guar-
antee does not include damage caused by improper transport and does not include damage to the electrical and electronic
systems caused by incorrect connection to the power supply. The guarantee includes repairs or replacement of all the parts
that are found to be defective in the 24 months (12 months by the manufacturer + 12 months by the seller) following the
delivery of the machine to the customer and applies when the customer informs the manufacturer, no later than the eighth
day from when the fault occurred. This Guarantee refers to possible defects in workmanship and it is excluded in any case of
improper use, improper placement and connection or in any case of tampering from unauthorized personnel. The guarantee
includes all technical telephone support, but the customer is liable for all shipping costs for sending all defective parts to be
replaced to FIEM and all technical call-out costs.
The guarantee does not include any compensation for any downtime of the machine or damages incurred during use.
Only staff authorised by the manufacturer must be allowed to carry out repairs under the guarantee; if this clause is
not adhered to, the guarantee will cease to apply.
STANDARDS OF REFERENCE
This product conforms to the essential Electromagnetic and safety requirements foreseen by the following directives:
• 2014/35/UE (LVD)
As projected in conformity to the prescriptions of the following Harmonized Rules:
• EN 55014-1:2006 + A1:2009 + A2:2011 • EN 61000-3-3:2013
• EN 55014-2: 2015 • EN 61000-3-2:2014
Conformity to the above requirements is attested by
The
mark was introduced in 1995.
It is opportune to underline the following actions that can prejudge the conformity and moreover the product characteristics:
• incorrect electricity supply;
• incorrect installation or incorrect /improper use or not conforming to the instructions reported in the instruction book sup-
plied with machine;
• replacement of its components with those not approved or adopted by the manufacturer, or replacement effected by
unauthorized technical service.
WARNING: THIS EQUIPMENT MUST BE EARTHED
ATTENZIONE: QUESTA UNITA' DEVE ESSERE CONNESSA A TERRA
ATTENTION: CETTE UNITE' DOIT ETRE MISE' A LA TERRE
ACHTUNG: DIESES GERAT MUSS EINEN ERDUNGSANSCHLUSS HABEN.
ATENCION: ESTE EQUIPO DEBE ESTAR CONECTADO A UNA TOMA DE TIERRA.
APPARATET MA KUN TILKOPLES JORDET STIKKONTACT. APPARATEN SKALL ANSLUTAS TILL JORDAT NATUKKAT.
LAITE ON LITTETAVA SUKO-RASIAAN.
of the attachement II, part. 1 section A of DL/17/2010/CE
Manufactured in the EU for:
THE MACHINE
MODEL
SERIAL NUMBER
IS MANUFACTURED AND SOLD IN CONFORMITY TO THE ESSENTIAL REQUIREMENTS OF HEALTH AND SAFETY
of D.M. 17 of 17 January 2010 – Attachement I (implementation of the Machinery Directive 2006/42/EC)
The metallic
all serial numbers, and product specifications are detailed on the plate.
THE FOLLOWING HARMONIZED RULES HAVE BEEN UTILIZED FOR THE CORRECT IMPLEMENTATION OF THE
ESSENTIAL REQUIREMENTS OF HEALTH AND SAFETY OF THE ATTACHEMENT I.
EN 55014-1:2006 + A1:2009 + A2:2011
EN 61000-2-2:2014
Guanzate (Co)
• 2014/30/UE (EMC)
DECLARATION OF CONFORMITY
Incubatrici F.I.E.M. S.r.l.
Via G.Galilei, 3 – 22070 Guanzate (Como) Italy
DECLARES THAT
Incubator
COSMO
plate fixed on the machine is an integral part of the same;
EN 55014-2: 2015
EN 61000-3-3:2013
marking on the product;
COSMO EVO
COSMO ML
The Declarer
21

Publicidad

loading

Este manual también es adecuado para:

Cosmo evoCosmo mlCosmo evo 72Cosmo 72 miniled