cecotec BOLERO SQUAD I 2100 Manual De Instrucciones página 11

SAFETY INSTRUCTIONS
Before using the appliance, read the following instructions
carefully. Keep this instruction manual for future reference or
new users.
- Ensure that the mains voltage matches the voltage
specified on the device rating label and that the plug is
earthed.
- It is recommended that the installation and connection
of the appliance be carried out by authorised specialists.
The manufacturer is not liable for damage caused by
installation or connection errors.
- Only a qualified technician must modify your home wiring
system.
- This appliance must be connected to a circuit fitted with an
isolating switch that allows total disconnection from the
mains.
- If the device is not correctly installed, any guarantee or
liability claims may be voided.
- If the cable is damaged, it must be replaced by Cecotec or
qualified personnel to avoid hazards.
- The appliance must be properly fitted and installed in a
suitable and approved kitchen unit and worktop.
- This device is designed for domestic use only and is not
intended for bars, restaurants, farmhouses, hotels, motels,
and offices.
- The device is not designed for outdoor use.
- Warning: If the induction hob surface shows cracks or
damage, turn off the device to avoid possible electric
shocks and contact the Technical Support Service of
Cecotec. Do not cook on a cracked or broken hob.
- The appliance heats up during use. Avoid touching the
BOLERO SQUAD I 2100
11