cecotec BOLERO SQUAD I 2100 Manual De Instrucciones página 93

1. Adjust the time using the slider.
2. Once time is confirmed, the countdown will start automatically. The
display will show the remaining time at each hour.
3. When the countdown is finished, it will beep for 30 seconds, and the
timer display will show "- -".
Use of the timer to turn off one or more cooking zones:
1. Press the icon of the cooking zone in which you want to set the timer
(lower zone).
2. Press the Timer icon. "00" will appear on the timer display and "0" will
flash.
3. Adjust the time using the slider.
4. Press the Timer icon again, this time the "0" will flash.
5. Adjust the time using the slider.
6. Once time is confirmed, the countdown will start automatically. The
display will show the remaining time at each hour.
NOTE: there will be a red dot in the lower right corner of the power
level indicating that the zone is selected.
7. When the countdown ends, the corresponding cooking zone will turn
off automatically.
NOTE: the other cooking zones will continue running if previously
switched on.
ENGLISH
BOLERO SQUAD I 2100
93