Mitsubishi Electric PAA-A18AA1 Manual De Mantenimiento página 56

15. Disassembly procedure
The side drain pan and the top plate must be removed from the coil assembly for vertical
configuration installations. Remove the side drain pan (as well as its support and 2 triangular
pieces) and the top plate as shown in the following steps. Removal of the side drain pan and top
plate increases airflow and efficiency.
FOR UPFLOW AND DOWNFLOW INSTALLATIONS:
1. THE TOP PLATE MUST BE REMOVED (AS SHOWN).
2. THE SIDE DRAIN PAN MUST BE REMOVED (AS SHOWN).
Specifications are subject to change without notice.
PAA-A18, 24, 30, 36, 42AA1/BA1/CA1 and all-
ATTENTION!
REMOVE TOP PLATE
56
REMOVE SIDE DRAIN PAN
© 2022 Mitsubishi Electric US, Inc.