Urmet iPercom 1060 Manual De Instrucciones página 3

ENGLISH
1 DESCRIPTION
The device Ref. 1060/41 is a switchboard dedicated to the Ipercom system.
See the switchboard installation and use manual for more information on how to use and confi gure the
device.
1.1 INSTALLATION
The following is needed for correct installation:
• Plug the loudspeaker connector (green connector) into the PC loudspeaker output.
• Plug the microphone connector (pink connector) into the PC microphone input.
• Plug the USB connector into the PC port.
The device does not need any installation driver; the installation starts automatically when the device is
connected to the PC via the USB cable.
1.2 TERMINAL DESCRIPTION
SP+ Loudspeaker signal
GND Reference ground
MC+ Microphone signal
}
S+
Additional ringer
S-
2 TECHNICAL SPECIFICATIONS
Power supply ...........................................................................................................................from USB port
Consumption .....................................................................................................................5 Vdc 500 mA Max
DS1060-122A
Green connector
Pink connector
USB connector
3