Siemens VS07G1466 Instrucciones De Uso página 14

Changing the dust bag
16
Cleaning the motor protection filter
The motor protection filter should be cleaned
regularly by tapping out the dirt or rinsing it out.
For hygiene reasons, however, we recommend that
you replace the motor protection filter.
You can order a new filter from our after-sales
service using the following replacement part
number: 616268
Open the dust bag compartment lid.
Release the motor protection filter from the
catch and pull it out in the direction of the
arrow.
Clean the motor protection filter by tapping out
the dirt.
If it is very dirty, the motor protection filter
should be rinsed.
The filter must then be left to dry for at least
24 hours.
After cleaning, refit the motor protection filter,
clip into place and close the dust bag
compartment lid.
en