Dreame DreameBot D10s Plus Manual De Usuario página 17

Routine Maintenance
4. Remove the filter and tap its basket gently.
Note: Do not attempt to clean the filter with a brush, finger, or any sharp objects so as to
avoid damaging it.
5. Rinse the dust bin and filter with water and dry them completely
before reinstalling.
Note:
· Rinse the dust bin and filter with clean water only. Do not use any detergent.
· Use the dust bin and filter only when they are completely dry.
Clean the Mopping Module
1. Slide the two release clips on the side of water tank to remove
the mopping module, and then pull the mop pad off the mopping
module.
12
11 1 2. Pour out the water in the tank. Clean with water only and leave
10 2
24 hrs
to air dry before re-installing.
9 3
8 4
7 5
6
Note: Do not directly expose the water tank to sunlight.
EN
15