Dreame DreameBot D10s Plus Manual De Usuario página 23

Troubleshooting
Problem Type
Robot does not turn on
Robot cannot recharge
Robot cannot return to the
base
Robot is malfunctioning
Robot is making a strange
noise
Robot no longer cleans
efficiently or leaves dust
behind
Solution
The battery level is low. Recharge the robot on the base, then try it again.
The temperature of the battery is too low or too high. It is recommended to operate the appliance at a
temperature between 32 ℉ (0°C) and 104 ℉ (40°C).
The base is not receiving power. Please confirm that both ends of the power cord are plugged in
correctly.
The robot may be in poor contact with the charging contacts. Clean the charging contacts on both the
base and the robot.
There are too many obstructions around the base. Place the base in a more open area.
Please clean the signaling area of the base.
Moving the robot may cause it to re-position itself or re-map its surroundings. If the robot is too far from
the base, it might not be able to automatically return on its own, in which case you need to manually
place the robot onto the base.
Turn off the robot and then reactivate it.
A foreign object may be caught in the main brush, side brush, or one of the main wheels. Stop the
robot and remove any debris.
The dust bin is full. Please clean the dust bin and auto-empty vent.
The filter is blocked. Please clean it.
A foreign object is caught in the main brush. Please clean it.
EN
21