Descargar Imprimir esta página

Dreame DreameBot D10 Plus Manual De Usuario página 23

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

FAQ
Problem Type
Robot cannot connect to Wi-Fi
Robot does not perform
scheduled cleaning
Does leaving the robot on the
base consume power if it is
already fully charged?
No water comes out of the
mopping module, or only a
little bit comes out
Robot doesn't resume cleaning
after charging
Solution
There is something wrong with the Wi-Fi connection. Reset the Wi-Fi and download the latest version of the
Dreamehome or Mi Home/Xiaomi Home, then try reconnecting.
Location permission is not open. Please ensure the location permission on the Dreamehome or Mi Home/Xiaomi
Home is enabled.
Wi-Fi signal is weak. Make sure the robot is in an area with good Wi-Fi coverage.
5GHz Wi-Fi is not supported. Please ensure your robot connects to 2.4GHz Wi-Fi.
The username or password of Wi-Fi is incorrect. Please enter the correct username and password.
The robot has low battery. Scheduled cleaning will not start unless the robot has been recharged in time.
Leaving the robot on the base after it's fully charged consumes very little electricity and helps maintain optimal
battery performance.
Check whether there is water inside the water tank.
Clean the mop if it becomes dirty.
Make sure the mop pad is installed correctly according to the user manual.
Clean the blowhole on the top of the water tank.
Make sure the robot is not set to Do Not Disturb mode (DND), which will prevent it from resuming cleaning.
The robot does not resume cleaning when it is manually recharged or placed onto the base.
EN
21

Publicidad

loading

Este manual también es adecuado para:

Rls3d