2. PRODUCT DESCRIPTION
To find out more about your product, consult the online EPREL database. As defined in
Commission Delegated Regulation (EU) 2019/2016, all information relating to this refrigeration
appliance is available on the EPREL Base (European Product Database for Energy Labelling).
This database enables you to consult the information and technical documentation of your
refrigeration appliance. You can access the EPREL Database by scanning the QR code on
the energy label of your appliance or by going directly to:
www.ec.europa.eu
and searching
the reference of your refrigeration appliance.
3. INSTALLATION INSTRUCTIONS
TRANSPORT INSTRUCTIONS
The appliance should be transported only in a vertical upright position. The packing as supplied
must be intact during transportation.
If during the course of transport, the product has been transported horizontally, it must only be
laid on its left-hand side (when facing the door front) and it must not be operated for at least 4
hours to allow the system to settle after the appliance is brought back to upright position.
1. Failure to comply with the above instructions could result in damage occuring to the
appliance. The manufacturer will not be held responsible if these instructions are disregarded.
2. The appliance must be protected against rain, moisture and other atmospheric influences.
IMPORTANT: Care must be taken while cleaning / carrying the appliance to avoid touching
the condenser metal wires at the back of the appliance, as you might injure your fingers and
hands or damage your product.
IMPORTANT: This appliance is not designed for stacking with any other appliance. Do not
attempt to sit or stand on top of your appliance as it is not designed for such use. You could
injure yourself or damage the appliance.
22