Pur Line Warmer Bed Plus Manual De Instrucciones página 9

• Do not use the blanket when wet and only use it in dry environments (not in
the bathroom or similar environments).
• The controller and cable must not be exposed to any kind of moisture.
• If a fault occurs, do not attempt to repair the blanket by yourself. Repairs must
only be carried out by an authorized specialist dealer or other suitably qualified
personnel.
• If the power supply cable is damaged, it may only be replaced by, an authorised
dealer or by qualified electricians. In order to prevent hazards, always send the
blanket in to the service centre.
• Let the blanket cool down completely before folding and storing it. Do not fold
it too tight.
• When not in use, store the blanket as follows:
- Store the blanket in its original packaging and keep it in a clean, dry place.
- Fold the power cable carefully to avoid cable breaks.
- Do not crease the blanket by placing items on top of it during storage.
• If you use a cardiac pacemaker, please consult your doctor and the manufacturer
of the pacemaker before using this heating pad.
• Should you have any concerns about health issues, consult your doctor
beforeusing the blanket.
OPERATION
It is recommended that the blanket to be switched on (in position 3) 15 minutes before going to
pre-heat it.
Plug the blanket into the power socket and select level 1.
You will feel the blanket gradually warm up. If you need a higher temperature setting, turn the
switch to position 2 or position 3. If the blanket gets too hot for you, select level 2 or 1. Levels 2 and
3 of the blanket are intended for warming, only level 1 is for continuous operation.
To turn the blanket off, press the "Off" button and unplug the blanket from the outlet.
The appliance is equipped with an automatic switch-off system after 2 hours to ensure safe use. It
is recommended to leave it off for 5 minutes before switching the blanket on again.
EN
7