Publicidad
Idiomas disponibles
Idiomas disponibles
A chain suspended version . Before drilling the holes for the
•
dowels, be sure that the ceiling is solid and that you are far from
water tubes or electrical wires Fix the buttonhole dowels at the
ceiling at a distance of about 55 cm. Fix the 4 half rings a the pipe
for the best stability. Ensure that the chains are securely mounted
as this application is designed for overhead use.
A version for mounting on upright (4165.785). The upright must
•
them in opposite position.
Before fixing the appliance on the upright, please ensure that
it is stable and solid. Preferably, use the upright that can be
ordered as accessory (cod. 4165.784). The feet must be
opened as far as the white evidenced line on the inferior tube reach-
es the junction of the feet. Fix the feet to the ground in a proper way,
and then fix the upright to the ground using the chain (fig.5).
Ensure that the supply cable is well mounted and that it does not
come into contact with the reflector of the heater or that it does not
trail into the heated area. The supply cable can be fixed to the metal
pipe behind the reflector with plastic wrappers.
4. USE
linear lamp with a tungsten element. The heater operates at full out-
put almost immediately. The heating reaches a distance of about 3
meters in front of the appliance.
11
-
Publicidad
