Publicidad
EnglisH
18
Problem
Skin irritation
occurs.
The leg skin
cooler is not
cold enough.
All manuals and user guides at all-guides.com
Possible cause
You used the
epilator for the
first time or
after a long
period of
disuse.
You have
applied too
much pressure
to the
appliance
You did not
freeze the leg
skin cooler long
enough.
You did not put
the leg skin
cooler in the
freezer or
freezing
compartment.
The leg skin
cooler did not
touch the skin.
Solution
Some skin irritation may occur the
first few times you use the
appliance. This is absolutely normal
and usually disappears quickly. For
tips to reduce skin irritation, see
the first section of chapter 'Using
the appliance'. Also make sure you
keep the epilating head clean.
Do not use any pressure when you
move the appliance over skin
Put the skin cooler without the
insulating sleeve in the freezer or
freezing compartment (***) for at
least 4 hours. When the colour of
the fluid has changed from white
to completely blue, the skin cooler
is ready for use.
Put the skin cooler without the
insulating sleeve in the freezer or
freezing compartment (***) for at
least 4 hours. Do not store the skin
cooler in the refrigerator.
Make sure the skin cooler is always
in proper contact with your skin
during epilation. Only use the leg
skin cooler to epilate your legs.
Publicidad
