Descargar Imprimir esta página

EMAK PW 155 Manual De Instrucciones página 19

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
WarnInG
• If this safety device cuts in repeatedly, do not use the water cleaner until it has been checked by a Skilled
Technician.
b) Pressure limit/adjustment valve
When this valve has been correctly set, the pumped fluid is able to return to the pump's suction unit, thus preventing
the creation of dangerous levels of pressure when the cleaner gun is stopped or should pressure be set that is above
allowed levels.
c) Safety stop on cleaner gun lever
This safety device (29) shuts and blocks the lever (28) on the cleaner gun (16) to prevent the possibility of it being
started by accident (see also Fig. 2, pos. S)
2.3 I
u
ntended
se
WarnInG
• This water cleaner is to be used exclusively for:
- cleaning vehicles, machinery, buildings, tools etc with cold water, possibly with the addition of detergents as
per the Manufacturer's instructions;
- distributing detergents as per the Manufacturer's instructions;
- removing lime scale and unblocking pipe work using the appropriate tools as per the Manufacturer's
instructions;
- water sanding objects using the appropriate tools as per the Manufacturer's instructions;
• The water cleaner must not be used to wash people, animals, energized electrical appliances, delicate objects or
the high pressure cleaner itself.
• The high pressure cleaner is not suitable for use in certain situations such as in corrosive or explosive
atmospheres.
• Contact the Manufacturer's service centre before use on board vehicles, ships or airplanes, as there may be
additional instructions for use.
Any other use is considered improper.
The Manufacturer is not liable for any damage caused by improper or incorrect use.
3 r
t
emovInG
he
WarnInG
• Protective gloves and glasses must be worn when removing the appliance from the packing materials to prevent
injury to the hands and eyes.
• The packing materials (plastic bags, staples etc.) must not be left in reach of children, as they are potentially
dangerous.
• The packing materials must be disposed of according to current regulations in the country where the water cleaner
is installed.
In particular, plastic bags and packaging must never be abandoned, as they are harmful to the environment.
• After removing the appliance from the packing materials, check that no parts are missing.
In case of doubt, do not use the water cleaner but contact an authorised service centre so that a Skilled Technician
can check the appliance
3.1 I
l
dentIfICatIon
See Fig. 1 at the front of these operating and maintenance instructions.
The identification label (12) contains the serial number and the main technical specifications of the water cleaner.
The warning labels (10) (13) inform you of any other risks, such as: do not use the high pressure cleaner unless
you have read the instructions manual; do not use the high pressure cleaner for washing people, animals, electrical
equipment or the high-pressure cleaner itself.
WarnInG
• After removing the appliance from the packing materials, check that the identification label and the warning
labels are present and are legible. If this is not the case, contact your dealer or an authorised service centre so
they can be replaced.
• If the identification label and the warning labels deteriorate during use, contact your dealer or an authorised
service centre so they can be replaced.
a
f
I
pplIanCe
rom
W
abel
and
arnInG
p
m
ts
aCkInG
aterIals
l
abels
GB
19

Publicidad

loading

Este manual también es adecuado para:

Pw 150cPw 140Ip 1400Ip 1500sIp 1550