Publicidad
Idiomas disponibles
Idiomas disponibles
TOPCOM TWINTALKER 3800
12.8 VOX SELECTION
The PMR is capable of voice activated (VOX) transmission. In VOX mode, the radio will transmit a signal when it is
activated by your voice or other sound around you. VOX operation is not recommended If you plan to use your radio in
a noisy or windy environment.
• Press
• Press
SCAN
VOX
DCM
• In the VOX mode, the VOX icon will be displayed.
• To confirm your selection and return to the NORMAL mode, press
12.9 CHANNEL SCAN
CHANNEL SCAN performs searches for active signals in an endless loop from channel 1 to 8.
•
Press and hold
. Press
•
Release the buttons.
•
When an active signal (one of 8 channels) is detected, CHANNEL SCAN pauses and you will hear the active
signal.
•
Press
to communicate through the active signal channel. Press
When an active signal (one of 8 channels) is detected, press
search for another active channel
12.10 CALL TONES
A call tone alerts others that you want to talk.
a.
Setting the Call Tone
5 different Call Tones can be selected.
SCAN
• Press
VOX
DCM
• Press
• Press
b.
Sending a call Tone
Press
briefly. The call tone will be transmitted for 3 seconds on the set channel.
12.11 ROGER BEEP ON/OFF
After the
- button is released, the unit will send out a roger beep to confirm that you have stopped talking.
To set the Roger Beep.
SCAN
• Press
VOX
DCM
• Press
• Press
12.12 KEY-TONE ON/OFF
When a button is pressed, the unit will beep briefly.
To set the key-tone.
• Press
SCAN
VOX
• Press
DCM
• Press
8
3 times.
to turn the VOX feature ON and press
which is indicated in the right corner of the display. Press
play, to turn VOX OFF.
briefly to start scanning.
4 times. CA will be displayed.
or
to select another call tone or select OFF to enable call tones.
to confirm your selection and return to the standby mode.
5 times. 'ro' will be displayed.
to enable (ON) or
to confirm your selection and return to the standby mode.
6 times. 'to' will be displayed.
to enable (ON) or
to confirm your selection and return to the standby mode.
again to select the VOX sensitivity level
to deactivate channel scan.
or
to bypass the current channel and continue to
to disable the Roger-Beep (OFF).
to disable the Roger-beep (OFF).
until OFF appears on the dis-
.
TOPCOM TWINTALKER 3800
Publicidad
