Publicidad
Idiomas disponibles
Idiomas disponibles
GB Operating Instructions
Dear Customer,
congratulations on purchasing
your new STEINEL sensor and
thank you for the confidence
you have shown in us. You
have chosen a high-quality
product that has been manu-
factured, tested and packed
with the greatest care.
Safety precautions
This product must only be
n
installed by a qualified elec-
trician in accordance with
national wiring regulations
as defined in VDE 08 29
(DIN EN 5000 90).
System components
Sensor module
1
Metal frame
2
Sensor base
3
How it works / basic function
The ultrasonic and DualTech
presence detectors from the
Control PRO range control
lighting as well as heating,
ventilation and air-conditioning,
e.g. in offices, schools, public
buildings or at home,
Operation
Note: for an application
description, please go to
www.knx.steinel.de
1. Issue physical address and
generate application program
in the ETS.
Please familiarise yourself
with these instructions before
attempting to install the sensor,
because prolonged, reliable
and trouble-free operation will
only be ensured if it is fitted
and used properly.
Installed improperly, low-
n
voltage products can cause
extremely serious personal
injury or damage to property.
Clamping-type ceiling
4
adapter, concealed box
Surface-mounting adapter
5
in relation to ambient light level
and the presence of persons.
The Presence Control is also
distinguished by its low intrinsic
power consumption.
2. Load the physical address
and application program into
the presence detector. When
you are prompted, press pro-
gramming button
7
- 9 -
We hope your new STEINEL
sensor will bring you lasting
pleasure.
This product must never be
connected to a 230 V AC
power supply as it is intended
for connection to an extra-
low voltage power supply.
Locking mechanism
6
Programming button
7
The function to be used (activat-
ed) is defined in the "General
Settings" parameter window
using the Engineering Tool
Software (ETS), version ETS3.f
and higher.
3. The blue LED goes out once
programming has been
successfully completed.
.
GB
Publicidad
