About This Document; General Safety Precautions - STEINEL HF 3360 PF Manual De Instrucciones

GB
1� About this document
– Please read carefully and keep in a safe place.
– Under copyright.
Reproduction either in whole or in part only with our consent.
– Subject to change in the interest of technical progress.
Symbols
!
Hazard warning!
Reference to other information in the document�
...
2� General safety precautions
!
Disconnect the power supply before attempting any work on the sensor�
• During installation, the electric power cable to be connected must not be live.
Therefore, switch off the power first and use a voltage tester to make sure the
wiring is off-circuit.
• Installing the sensor involves work on the mains power supply. This work must
therefore be carried out professionally in accordance with national wiring regula-
tions and electrical operating conditions. (DE - VDE 0100, AT - ÖVE-EN 1,
CH - SEV 1000)
3� HF 3360 PF
Proper use
– Sensor suitable for indoor wall and ceiling-mounting
The HF 3360 PF is an active motion detector. It responds to the slightest
movement regardless of temperature. The integrated HF sensor emits high-frequency
electromagnetic waves (5.8 GHz) and receives their echo. In response to the slightest
movement in the detection zone, the change in echo is perceived by the sensor.
A microprocessor then issues the switch command "switch light ON".
Detection is possible through doors, panes of glass or thin walls.
Optionally, all function settings can be made via the RC5, RC8 remote controls as
well as the Smart Remote. (➔ "7� Accessories (optional)")
21