American Standard Glenmere TU617508 Manual Del Propietário página 4

2
STANDARD WALL INSTALLATION
• Figure 1. Remove plaster guard from valve. Push
CAP (1) over VALVE CARTRIDGE (2) until seated
against stop.
• Figure 2. Push ESCUTCHEON (3) onto CAP (1) and
attach to valve body with LONG SCREWS (4).
THIN WALL INSTALLATION
• Figure 1a. Push CAP (1) over VALVE CARTRIDGE (2)
until seated against stop.
• Figure 2a. Push ESCUTCHEON (3) onto CAP (1)
and attach to valve body with LONG SCREWS (4).
PLASTER
GUARD
Figure 1.
C
Figure 1a.
3
INSTALL TUB SPOUT, SHOWER HEAD, SHOWER ARM WITH FLANGE
Protect finish on Shower Head
and Tub Spout when installing.
Note: ADAPTER (5) and TUB SPOUT (1) only included in
SKU TU617508.
• Thread ADAPTER (5) on to the pipe. Thread TUB SPOUT
(1) on to ADAPTER (5).
• Install SHOWER ESCUTCHEON (2) onto SHOWER ARM
(3). Apply sealant or Teflon tape to threads on both ends
of SHOWER ARM (3) and thread longer leg of SHOWER
ARM (3) into shower elbow.
• Thread SHOWER HEAD (4) onto SHOWER ARM (3).
CAUTION: Protect finish on SHOWER HEAD and ARM
when installing.
A C
1
2
2
1
4
1
Figure 2.
1
Figure 2a.
2
3
4
PIPE
CAP
1
5
3
4
3
4
SHR.
ELBOW
PIPE
PLUG
TUB FILLER
NIPPLE
F .
R E
6 "
1 / 1
3 -