Hudora 65138 Instrucciones Montaje Y De Uso página 5

INSTRUCTIONS ON ASSEMBLY AND USE
GB
CONGRATULATIONS ON PURCHASING YOUR PRODUCT!
Please read these instructions carefully. The instructions are an integral part of the
product. Therefore, please store them and the packaging carefully in case questions
arise in the future. Please always include these instructions when you are handing
on the product to a third-party. Children should only assemble, use or repair the
product when they are under adult supervision. This product is not suitable for indu-
strial use.
Technical specifications:
Item : folding trampoline 140 cm Ø
Item number : 65138
Weight : 12,5 kg
Maximum carrying capacity: 100 kg
If you have assembly problems or would like further information on the product, we
have all you need and more at http://www.hudora.de.
Parts List
No. Description
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1 Frame Component A
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
2 Frame Component B
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
3 Frame Component C
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
4 Frame Component D
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
5 Mat
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
6 Safety Padding
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
7 Stand
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
8 Stand Cover
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
9 Under Cover Disk
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
10 Safety Bolt
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
11 Round Head Screw (1/4"-20 x 1 3/4")
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
12 Disk (1/4")
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
13 Self-Tightening Nut (nylo coated) (1/4"-20)
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
14 Spring
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
INSTALLATION INSTRUCTIONS AND INFORMATION:
1. Keep children away from the folding trampoline during the installation process.
2. Do not touch the ends of the frame components with your fingers while unfolding
the folding trampoline. The folding trampoline will lock into the unfolded position.
If fingers are caught between the ends of the frame components, pinching may
cause serious injuries.
3. If you let go prior to the frame components having locked into place the frame
components will go back into the folded up position while you are unfolding the
folding trampoline.
4. The folding trampoline should always be unfolded or folded by two or more
strong individuals.
Prior to installation, cross check all springs. These have been pre-installed by the
factory. If one of the springs is not attached or appears to be damaged, please per-
form the following steps to secure the spring or exchange it:
A. Hook the open end of the spring (14) into the hole on the panel. See Figure A.
B. Turn the spring (14) in the direction of the trampoline. See Figure B.
C. Slide the metal bow on the mat (5) over the spring hooks as shown in Figure C.
Quantity
1
1
1
1
1
Open
end
1
8
8
8
1 Prior to the performing the installation, make sure that the safety bolts (10) have
been inserted into the frame components correctly. The two overhangs must be
4
installed within the frame components, as shown in the cross sectional drawing in
8
the Figure. Failure to do so can cause damage to the safety bolts (10) during instal-
lation step 3.
4
48
Step 1:
Place the trampoline on the ground and open the frame components. The trampoline
should look exactly as shown in Figure 1.
1
Make sure that the safety bolts (10) have been inserted into the ends of the panels
(1, 2) and secure the wire ring. Both ends of the safety bolts
(10) should be placed at intervals of approx. 30 cm between the frame components
(1 + 2 and 3 + 4) and the wire ring. See Figure 2.
HUDORA GMBH • Jägerwald 13 • 42897 Remscheid
http://www.hudora.de
Cross Sectional
View
Safety bolt
Wire ring
Safety bolt
Frame component
Art.-Nr. 65138
Stand 07/09
5/12